OEM PRODUCT FAMILIES / 01
Your specification.
Our production.
Rock bolts, mesh, straps, plates and anchorage components manufactured against buyer-approved requirements for importers, distributors and mining supply companies.
SELECT A PRODUCT FAMILY
Standard starting points.
OEM order control.
The sizes shown are capability references, not a substitute for an approved order specification. Final material, dimensions, tolerances, inspection, marking and packing are confirmed before production.
Steel Resin Rock Bolts
Metric resin-anchored bolts for roof and rib reinforcement, available in project-specific diameters, threads, lengths and steel grades.
16 / 18 / 20 / 25 mm core; 1.2-3.0 m · MT/T 146.2-2011 (certified models); project specifications → 02
Friction Rock Bolts
Available for RFQ review through an order-confirmed manufacturing route, subject to buyer-approved specification and technical/supply confirmation; this does not confirm in-house manufacturing.
RFQ / technical confirmation required · Supply route confirmed per order → 03
25 mm Threadbar Rock Bolt
High-capacity continuous-thread rock bolt for resin or cementitious anchoring in underground mines.
25 mm core; 1.8 / 2.1 / 2.4 / 2.7 / 3.0 m · Typical sizes / project specifications → 04
15.2 mm Cable Bolts
Plain and bulbed seven-wire cable bolts for long-tendon ground reinforcement, supplied cut-to-length or coiled.
15.2 mm; plain/bulbed; single/twin; 3-30 m · Typical sizes / project specifications → 05
Welded Mine Mesh
Flush-cut welded steel mesh for underground roof, rib and shotcrete reinforcement.
5.6/100x100; 4/75x75; 4/100x100 grid references; measurement convention per buyer-approved specification; width up to 2.4 m · Typical sizes / project specifications → 06
Mining W-Straps
Roll-formed steel straps manufactured for buyer-defined roof and rib support configurations.
APAC 280/290 mm; EME SP270/SP320; 0.9-7 m · Typical sizes / project specifications → 07
Mining Bearing Plates
Dome, flat and formed plates manufactured for buyer-specified resin-bolt, friction-bolt or cable-bolt interfaces.
150x150; 200x200; 300x300; 4-12 mm · Typical sizes / project specifications → 08
Cable Anchorage & Rock Bolt Fasteners
Barrels, wedges, nuts, dome balls and washers manufactured for buyer-specified bolt, strand and seating interfaces.
15.2 mm barrel/wedge; DIN405; M24x3; M20-M33 options · Buyer-approved interface / project specifications → 09
Custom Ground Support Manufacturing
Build-to-drawing production for diameter, length, thread, hole pattern, material and surface treatment, subject to technical confirmation.
Drawing-based project requirements · Customizable parameters →VERIFIED FACTORY ENVIRONMENT
Inside our Shahe manufacturing base.
Current workshop photographs show production equipment, material staging and day-to-day manufacturing conditions. No stock image is presented as factory evidence.
View all 14 factory photos ↗
BUILD TO SPECIFICATION